• 0
  • 0

Global Iron Oxide Nanoparticles market trend 2024-2026 What is Nano Iron Oxide Fe3O4 Powder? by Newsvegasreportnewswire

Since 2022, Russia-Ukraine geopolitical conflicts have intensified, and global energy prices have risen sharply, with international natural gas prices hitting historic highs. As the most important transitional energy source in the transition from fossil energy to non-fossil energy, the share of natural gas in primary energy has increased from 14.6% in 1965 to 24.7% in 2020.  The global gas price indices showed a unilateral downward trend from 2018, bottomed out in 2020, and remained low for a long time. However, since July 2020, the global gas prices have gradually fluctuated upward, and the impact of geopolitical events made the Dutch TTF gas price even hit record highs repeatedly.

An analyst of a securities company believes that the core catalyst of this round of global gas market lies in the lack of investment in upstream oil and gas resources caused by long-term low prices. Since 2020, although the epidemic has led to a decline in demand, the decline in supply has been faster, resulting in a large inventory consumption. In 2021, demand will recover faster than supply (the supply-side is less sensitive to prices, which will be reflected in investment).  

As the world's two largest gas Iron Oxide Nanoparticles are also expected to change significantly.

Introduction to Nano Iron Oxide Powder
Iron oxide or ferric oxide is a kind of inorganic substance, and its chemical formula is Fe3O4. It is a black crystal with magnetic, so it is also known as magnetic iron oxide. Iron oxide is insoluble in water, alkali solution, ethanol, ether, and other organic solvents. Natural ferric oxide is insoluble in acid solutions and readily oxidizes to ferric oxide (Fe2O3) in the air under wet conditions. It is usually used as a pigment and polish, as well as in the manufacture of audiotapes and telecommunications equipment. 
Ferric oxide has ferromagnetic properties and is called ferromagnetic particles if the particle radius is on the nanometer scale.
Nano ferric oxide (Fe3O4) powder is magnetic and can realize directional movement in the external magnetic field. It has superparamagnetism when its particle size is in a certain range, and in the external alternating electromagnetic field, it can generate heat. It has stable chemical performance.

Physicochemical Properties of Nano Iron Oxide Powder
Black Fe3O4 is a mixed-valence oxide of iron with a melting point of 1597 and a density of 5.18g/cm3. It is insoluble in water but soluble in acid solution. It appears in nature in the form of magnetite and has strong submagnetite and high conductivity at room temperature. 
When an iron wire is burned in oxygen, Fe3O4 will be generated.
When iron comes into contact with air it forms oxides on its surface, and the oxide film itself is not uniformly composed. For example, a piece of low carbon steel can be covered by three oxide films: when it contacts with metal contact FeO forms, contacts with air Fe2O3 forms, and the middle is Fe3O4. Rather, it may be a mixture of saturated solid solutions of three oxides that form the oxide film on the surface of the steel. 
At the same time, the thickness of oxide film varies according to different environmental conditions during oxidation. At room temperature, the oxide thickness of relatively pure iron in dry air does not exceed 20 angstroms (1 angstroms =0.1 nm). However, the oxide film thickness increases significantly in humid air and rust spots can be seen on the surface.  At this time, oxide deposition is stratified, with a dense amorphous anhydrous layer on the side close to the metal and a thick porous hydrated layer on the side close to the air. 
Iron reacts with water vapor to form Fe3O4 and hydrogen. 
Fe3O4 has an anti-corrosion effect, such as the blue of iron and steel parts (also known as burning blue and baking blue) is to use the oxidation of alkaline oxidizing solution to form a layer of blue-black or dark blue Fe3O4 film on the surface of iron and steel parts, to increase corrosion resistance, luster and beauty. 


Nano Iron Oxide Powder Properties
Other Names magnetic black, fenosoferric oxide, ferro ferric oxide, ferrosoferric oxide, Fe3O4
CAS No. 1317-61-9
Compound Formula Fe3O4
Molecular Weight 233.53
Appearance black powder
Melting Point 1597°C
Boiling Point N/A
Density 4.8-5.1g/cm3
Solubility in H2O N/A
Exact Mass 231.784471

Iron Oxide Fe3O4 Powder CAS 1317-61-9

Preparation Methods of Nano Iron Oxide Powder
Since 2013, a large number of literature on the preparation of nano-Fe3O4 have emerged, and some new preparation processes have also been emerging. The traditional preparation methods of Fe3O4 include the precipitation method, hydrothermal (solvothermal) method, micro emulsification method, and sol-gel method. New preparation methods, such as microwave method, pyrolytic carbonyl pre-body method, ultrasonic method, air oxidation method, pyrolytic reduction method, and polyol reduction method, are gradually becoming the focus of research. In the preparation of Fe3O4, new surfactants and preparation systems have also made breakthroughs. Surfactants have not only been limited to SDS, PEG, CTAB, citric acid, oleic acid, etc., NSOCMCS, and polyacrylamide as modifiers have also been reported. Ethanol - water system, n - propanol - water system, propylene glycol - water system, etc. 

Applications of Nano Iron Oxide Powder
As a multifunctional magnetic material, nano ferric oxide has been widely used in tumor treatment, microwave absorption material, catalyst carrier, cell separation, magnetic recording material, magnetic fluid, medicine, and other fields. Or it can be: 
used as edible melanin. 
used as an analytical reagent, also used in the pharmaceutical industry, pigment preparation, and electronic industry 
used as the main raw material of ammonia catalyst 
used as the pigment of watercolor, oil color, and ink. Coating industry for the manufacture of anti-rust paint and other primers. Construction for artificial marble and cement floor coloring. Magnetic steel is used in the electronics and telecommunications industry as a cathode plate for alkaline dry cells. Used for steel flaw detection in machine building. 
used for coloring tablet icing and capsule. 
used for pigment and polishing agent, used for coating, plastic, and building surface coloring 

Main Supplier of Nano Iron Oxide Powder
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including iron oxide powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality nano iron oxide powder, please feel free to contact us and send an inquiry. ([email protected])


Commodities such as crude oil, wheat, cotton, and nickel have rallied since Russia's "special military operations" began in late February. On the last trading day of this quarter, commodities were on track for their biggest gain since 1990. For this reason, it is expected that the price of the Iron Oxide Nanoparticles will continue to increase.

Inquery us

Our Latest News

Global Conductive graphite powder market trend 2023-2030 What is the difference between conductive graphite powder and graphite powder for rubber? by Newshotline-web

Conductive graphite powder, graphite powder for rubber, graphite powder for plastics, etc. are all graphite powder products. , Graphite powder for different purposes is processed by different processes.…

Global Cu2O powder market trend 2023-2028 Cuprous Oxide as a Semiconductor Material by Newshotline-web

Gold is a high-quality hedge hedging tool, favored by investors. Especially in recent years, with the increasing instability of the world economy, gold has become one of the preferred asset allocations of investors because of its functions of hedging…

Global molecular sieves market trend 2024-2026 What are Molecular Sieves Used For? by Newshotline-web

Molecular sieves are materials with holes of uniform size (very small holes). These pores are similar in size to small molecules, so large molecules cannot enter or be adsorbed, while smaller molecules can.…